OCP 3.0 10G copper RJ45 2 port NIC network controller card with INTEL X550-AT2 chipset

PCIe 3.0 x8 card in Open Compute Project (OCP) 3.0 server format, offering two RJ45 10G copper ports.

Features:

CHIPSET: Intel ELX550-AT2.
OCP 3.0 Small Form Factor .
Specification PCI-Express v3.0, x4 .
Two 10GbE RJ45 ports supporting speeds of 10Gb/s, 5Gb/s, 2.5Gb/s, 1Gb/s, 100Mb/s..
10GBASE-T according to IEEE 802.3an. 1000BASE-T and 100BASE-TX in accordance with IEEE 802.3-2012.NBASE-T in accordance with IEEE P802.3bz/D1.1 Draft Standard for Ethernet Amendment.
Half-duplex operation at 10/100 Mbp and full-duplex operation at all supported speeds.
Layer 2 features: IEEE 802.3x flow control - IEEE 802.1q VLAN.
Support for receive-side scaling (RSS). Support for IPv 4 and IPv 6 protocols.
Support for Jumbo frames up to 15.5K. Supports UDP.TCP and IP Checksum offloading .
128 transmission queues. Statistics for management and RMON.
Support for 64 virtual machines per port (64VMs x2 queues).
Support for Data Center Bridging (DCB) (802.1Qaz, 802.1Qbb, 802.1p).
Interrupt control to limit maximum interrupt rate and improve CPU utilization.
Virtualization features VMDQ, PCI-SIG, SR-IOV, virtual machine load balancing, advanced packet filtering, VLAN, VxLAN, GENEVE, NVGRE, MPLS, VxLAN -GPE, NSH.
Possibility of PXE, UEFI, SNMP management.

Requirements: Windows 8 10 11, Server 2016/ 2019/ 2022, Linux RHEL 9.2/ 8.8, SLES15 PS4, Ubuntu 22.04/ 20.04, Debian11, FreeBSD 13/12.3.
Dimension 115 mm x 76 mm