SATA to IDE 2.5 44 pin "L" converter Plates behind the SATA disk and converts it to IDE 2.5

Thanks to this adapter, you'll be able to use a SATA hard disk on a notebook PC with a 2.5" IDE input! The adapter is fitted to the rear of the SATA drive, covering its power+data connector and "physically" transforming it into a 44-pin IDE drive. The conversion takes place on less than 3mm of thickness, allowing the SATA disk to be inserted into the slot designed for an IDE disk!!!!
Compatibility:
For all SATA format hard disks,
The adapter covers the SATA power connector and the SATA data connector.
Male IDE 44-pin socket for connection in place of an IDE 2.5" hard disk on the motherboard of a laptop or mini PC in IDE 44 pins.
SATA disk supply via IDE 44 connector.
The 44th pin, which serves as a coding pin, has been removed on this version, so you don't have to do anything and there's no risk of mounting the drive upside down on the IDE connector.
CHIPSET JMICRON JM20330
Dimensions: L 69mm x D 14mm x H 17mm
Compatible with ALL WINDOWS and MAC!!!