Out of stock
Out of stock
Minimum purchase quantity
The minimum purchase quantity is not reached

 

  • CB5
  • CB4
  • CB1
  • CB2
  • CB3
  • Lien Paypal
  • CHEQUE
  • Net Mobile

 

4x PCIe controller card for U.2 NVMe SSDs (U2 68Pin SFF-8639) - LOW AND HIGH PROFILE EQUERS

zoom

see also : 4x PCIe controller card for U.2 NVMe SSDs (U2 68Pin SFF-8639) - LOW AND HIGH PROFILE EQUERS 4x PCIe controller card for U.2 NVMe SSDs (U2 68Pin SFF-8639) - LOW AND HIGH PROFILE EQUERS

non-contractual photo

4x PCIe controller card for U.2 NVMe SSDs (U2 68Pin SFF-8639) - LOW AND HIGH PROFILE EQUERS

Ref. Adaptateur U.2 vers PCIe 4x - Ceacent
KALEA-INFORMATIQUE
3760306790803
New 22.42 Not including tax 26.90 Including tax

In stock

quantity

Back in stock notification
Receive an alert by email when your choice is in stock
Your e-mail*:

Send this page to a friend

Product Details

This card will enable you to mount a U.2 NVME SSD on a 4x, 8x or 16x PCIe slot.
Compatibility:
Supports all current 2.5" U2 SSDs (e.g. Intel DC P3500/P3600/P3700, Samsung XS1715, OCZ Z-drive 6000, HGST Ultrastar SN100 etc.) For 4x PCIe slot (4x, 8x, 16x compatible).
Specifications:
PCIe 4x 3.0 (can be used on older PCIe standards, but throughput will be lower, see below).
MiniSAS connector SFF-8643 (V 3.5) on PCIe card, connection to SSD U.2 via SFF-8643 / SFF-8639 cable (NOT SUPPLIED).
Maximum data rate 32Gbps in PCIe 3.0 / 16 Gbps in PCIe 2.0 / 8 Gbps in PCIe 1.0.
Operating system must support U.2 SSDs (Win 10, Win 8, Win 7 64 bit).
PLEASE NOTE: Not all BIOSes support U.2 drives in NVMe format, so you'll need a BIOS with UEFI. In addition, software installation is often required with U.2 SSDs: check with the manufacturer of your SSD to be sure.
Compatible with all U.2 NVMe 2.5" SSDs using the SFF-8639 interface.
Driverless, works transparently with the operating system.
The PCIe card is supplied with high profile bracket and low profile bracket.