1.44MB floppy disk emulator allows you to replace a floppy disk drive with a USB flash drive.

Floppy disk emulator, allows you to replace a floppy disk drive with a USB flash drive.

Suitable for devices using 1.44 MB floppy disks and a standard drive, such as: Textile machines (e.g. STOLL, MÜLLER 3, BONAS, STAUBLI JC4/JC5), Musical instruments (YAMAHA, KORG, etc.) and various equipment requiring a 34-pin floppy disk drive.

The device comes with firmware compatible with 1.44 MB floppy disks, 34-pin interface (IBM/PC), DOS/FAT12 format, based on an AT32F415 Cortex-M4 microcontroller.

Before installation, check that your equipment supports these features.

Installation precautions:

Be careful not to reverse the cable when connecting.

The USB key must be formatted in 1.44 MB FAT12 to be recognized correctly by the GOTEK emulator.

For use on AMIGA, it is necessary to replace the original firmware with the FlashFloppy firmware.

Allows you to replace a floppy disk drive that meets these specifications:

34-pin interface, 5 V DC power supply

2HD 1.44 MB floppy disks

Formatting parameters: 80 cylinders, 160 tracks, 18 sectors of 512 bytes per track, 500 kbps transfer rate, and MFM encoding

Features:

32-bit CPU architecture offering high integration and excellent reliability.

Direct connection to the floppy disk drive interface for quick and easy installation.

Uses a standard USB flash drive as storage media, replacing physical floppy disks.

Compatible with many industrial and electronic devices originally based on floppy disks (textile, automatic machines, musical instruments, etc.).

34-pin floppy disk interface + 5 V power supply, easy installation.

Uses a standard USB flash drive as a transfer medium.

Manages up to 1000 virtual partitions on the USB flash drive.

Built-in automatic formatting function (see documentation for use).

7-segment display shows the selected partition number.

Buttons for incrementing tens, units, and hundreds.