Docking Station. Dock for 5 Cards Compact Flash Link USB3.0 with CLONING function. External Power Supply. USB 3 5G

Specification :
Support memory: support CFast interface flash card, can support 64G capacity
External interface: USB3.0
Host interface: USB2.0/3.0 compatible
Number of cloned disks: one pair of four (source flash card clone pair)
Product features: 01 connected computer read and write 02 offline clone copy
Shell material: ABS + aluminum alloy + PVCB
Matching line length: 80CM
Product net weight: 306g without adapter
Product size: 163*125*41MM

PM mode:
1. Insert CFLASH SSD into the A-E card slot
2. Mode is adjusted to "PM" mode
3. Turn on the power and turn the switch to "ON"
Connect the computer to read and write normally.
Clone mode:
1. The actual capacity of the target disk (B\C\D\E) must be greater than or equal to the source disk (A). Insert the CFLASH into the A-E card slot.
2. Change the mode to "Clone", turn on the power switch, and wait for the corresponding drive to light up.
3. Press the clone button twice, the cloning machine will make a “drip” sound, and the digital progress will start from 0%.
4. After the progress reaches 100%, two to three "drips" will be issued and the clone will be completed.
  Note: This Duplicator is a 1:1 original clone. If there is data in the target disk, it needs to be backed up in advance, otherwise the data will be overwritten by the source disk. The new disk does not need to be initialized and can be used directly as the target disk. If you want to stop cloning , press the clone button once, If you want to continue, press the clone button again. If the cloning error triggers the buzzer alarm, press the “Mute” button to cancel the alarm sound.