HDMI 1.4 Wall SPLICER for Image Wall on 2 to 9 screens. 13 possible combinations, with remote control.

This Video wall splicer is a simple nine screen splicing processor, which can realize nine-picture splicing or split function with one button. Adopting unique embedded hardware design, it can accept input of various image signal sources and after splitting and amplifying, real-time HDMI output without distortion. The process of video controller through hardware design, and it does not need computers and startup software to operate, which is very simple. Its basic function is to divide and amplify the HDMI signal, and then output it from nine HDMI ports, and directly display it to the terminal display device for splicing display.

It can support input picture splicing and picture non-splicing mode. Displayed on different screens at the same time, customers can combine any splicing method to display through the cascade mode.

It adopts cutting-edge processing technologies such as motion detection and compensation, interpolation, edge smoothing and clutter signal suppression, and no delay after splitting, no tailing phenomenon, natural and smooth, and clear picture quality.

Feature:
Full hardware architecture, no software settings required, plug and play
Support audio input and output
Support power off memory function
The resolution supports 1280*720P@60Hz, 1920*1080@60Hz
Color depth 24 bit
Simultaneous output of digital video and I2S digital audio signals
Switching method: remote control switch, panel button switch
13 splicing modes can be changed at will: 1x1, x2, 2x1, 1x3, 3x1, 2x2, 1x4, 4x1, 2x3, 3x2, 2x4, 4x2, 3x3
Dimension 25.2x9.9x3.2cm