Power supply connector sets for repairing or adapting power supplies

Use:

This corded end cap set has two applications:

- Repairing an existing power supply: a supplied electrical cord can be fitted in place of the existing cord if it has been cut, pinched or has its end cap pulled off. In most cases, this cord will be soldered in place of the old one. You can then adapt one of the 23 end ferrules supplied to suit your electrical equipment.

- Adapt a power supply with a 2.1x5.5 or 2.5x5.5 end ferrule by transforming this end ferrule into any of the 23 supplied by simply fitting it onto the original end ferrule. No disassembly or electrical intervention, simple and safe!
End cap specifications:

1. 7.9x5.5mm (with pin) : IBM / LENOVO: 20V / 4.5A, 20V / 3.25A etc
2. 7.4 * 5.0mm (with pin) : DELL: 19.5V / 3.34A, 19.5V / 4.62A; HP / COMPAQ: 18.5V / 3.5A, 18.5V / 4.9A etc
3.Toshiba 4pins
4.DELL 3pins
5. 6.0 * 4.3mm with pin) Support: SONY: 16V / 3.42A, 16V / 3.75A, 16V / 4A; FUJITSU: 16V / 3.36A, 16V / 3.75A; SONY: 19.5V / 2.7A, 49.5V / 3A, 19.5V / 4.1A, 19.5V / 4.7A; FUJITSU: 19V / 3.16A, 19V / 3.69A, 19V / 4.22A; SAMSUNG: 14V / 3A, 14V / 4A; DELL: 14V / 3A and.
6. 6.3 * 3.0mm : TOSHIBA: 15V / 3A, 15V / 4A, 15V / 5A, 15V / 6A; NEC: 15V / 6A etc
7. 5.5x2.5mm (white): IBM: 19V / 3.42A; ASUS: 19V / 4.74A; LS: 20V / 3.25A; 15V / 5A, 15V / 6A; DELL: 19V / 3.16A, 19V / 3.42A; COMPAQ / HP: 18.5V / 4.9A, 19V / 4.9A; DELTA: 19V / 2.64A; TOSHIBA: 19V / 3.16A, 19V / 3.42A, 19V / 4.74A; LITEON: 19V / 3.16A, 19V / 3.42A, 19V / 3.95A, 19V / 4.7A; GATEWAY: 19V / 3.16A, 19V / 3.42A, 19V / 3.68A, 19V / 4.74A etc.
8. 5.5x2.5mm (yellow)
9. 5.5x2.5mm (white)
10. 5.5x2.1mm (yellow) : Acer 19V / 3.16A, 19V / 3.42A, 19V / 4.7A; lITEON: 19V / 3.16A, 19V / 3.42A; 19V / 3.16A;
NEC: 19V / 3.16A etc
11. 5.5x2.1mm (blue)
12. 5.5x2.1mm (black)