Professional Network Tester RJ45 RJ11 USB BNC Test Length Mapping Marker

Tests the length of RJ45 cables (main unit).
Tells you the total length of the cord, or in the event of a fault, the distance to the point of origin where the damage is located on the cable.
Maps RJ45 and BNC cords (main unit with its satellite). Displays the wiring diagram on its screen. You'll be able to see if the cord is straight or crossed, for example, or if one of the 8 wires of an RJ45 cord is cut or has a bad contact. Trace RJ45 RJ11 BNC USB cords and any metal cables (main unit with locator). Connect the end of one cable to the main unit. Thanks to the detector, you'll be able to locate this cable among a multitude of others, so you can easily intervene on it in the event of damage, for example. The detector lights up in front of it and emits a beep to locate the cord, so you can even use the headphones supplied to work in silence! Black and white LCD display. Port Flash" function (allows you to simulate activity on the network cord so that its input on the switch flashes).
Possibility of scanning through a PoE (Power Over Ethernet) switch.
Central control :
LCD screen Large 53x25mm backlit display,
Trace signal frequency 225Hz,
Maximum trace distance 2000m,
Maximum mapping distance 1000m,
Maximum test distance 1000m,
Tone 2 Tones, adjustable,
Compatible with RJ11,RJ45,BNC,USB,
Mapping On LCD screen,
Shield indication On LCD screen,
Voltage protection AC 60V/DC 42V,
Low battery display On LCD screen (6.5V),
With DC9.0V battery (NEDA 1604/6F22 DC9V) x 1pc ,
Dimensions (LxWxD) 185 x 80 x 32mm.
Locator :
Frequency 225kHz,
Consumption less than 70mA,
Headphone socket 1,
LED 2 LEDs,
Battery type DC9.0V?NEDA 1604/6F22 DC9V) x 1pc ,
Dimensions (LxWxD) 218 x 46 x 29mm.
Contents:
1x central control with large LCD display, 1x satellite, 1x induction sound locator, 1x headset, 1x RJ11 adapter / "crocodile" clips, 1x soft case. Please note that the tester interface is in ENGLISH.