Copy Machine SATA, mSATA, and M.2 SATA and M.2 NVMe drive duplicator, multi-standard cloning station for SSDs and HDDs

This station combines a multi-format USB read/write docking function with an offline standalone duplicator function for SATA and NVMe storage devices.

When connected to a computer, it provides direct access to M.2 NVMe SSDs, M.2 SATA SSDs, mSATA SSDs, as well as 2.5“ and 3.5” SATA drives. The host connection uses a USB Type-C interface compliant with USB 3.2 Gen 2x2 (20Gbps).

In standalone mode, without a connection to a computer, the device performs direct hardware cloning between two drives using the same protocol, without software or system intervention.

Compatibility:

Supported storage devices: M.2 NVMe PCIe Gen3/Gen4 SSDs, M.2 SATA NGFF SSDs, mSATA SSDs, 2.5-inch SATA SSDs, 2.5-inch/3.5-inch SATA hard drives.

Supported M.2 form factors: 2230, 2242, 2260, 2280, 22110.

Compatible with USB 3.2 Gen 2x2 (20Gbps) and USB 3.2 Gen 2x1 (10Gbps).

Supports Windows, macOS, Linux...

Technical description:

Multi-interface USB cloning station/dock for SATA and NVMe drives.

Read/write via USB interface.

Standalone offline cloning.

Direct drive-to-drive duplication.

USB Type-C USB 3.2 Gen 2x2 host interface, 20Gbps.

Cables included: 1 x USB Type-C to Type-C, 1 x USB Type-A to Type-C.

Measured performance reaches 1.69 GB/s read and 1.59 GB/s write on NVMe drives, and up to 529 MB/s read and 487 MB/s write on SATA drives, depending on the drive used, the host interface, and the system environment.

3 separate source/destination interfaces: 1 x NVMe- and SATA-compatible M.2 socket, 1 x mSATA socket, 1 x 22-pin SATA connector (7+15).

External 12V / 3A power supply.

Aluminum chassis, passive cooling via heat dissipation from the enclosure.

Cloning function:

Cloning is performed offline, without a connection to a computer, via an integrated hardware controller and triggered by a physical button.

Supported cloning protocols:

NVMe to NVMe,

M.2 SATA to M.2 SATA,

mSATA to mSATA,

SATA to SATA,

M.2 SATA to mSATA,

mSATA to SATA,

M.2 SATA to SATA.

No protocol conversion is supported by the cloning controller (Examples not supported: NVMe to SATA, SATA to NVMe, mSATA to NVMe).

Cloning progress LED.