Professional Network Tester RJ45 RJ11 USB BNC Test Length Marker Mapping - Anti-Jamming Function

Tests length of RJ45 and BNC cables (main unit). Tells you the total length of the cable, or in the event of a fault, the distance to the point of origin where the cable damage is located. Maps RJ45 and BNC cords (main unit with satellite). Displays the wiring diagram on its screen. You'll be able to see if the cord is straight or crossed, for example, or if one of the 8 wires of an RJ45 cord is cut or has a bad contact. Trace RJ45 RJ11 BNC USB cords and any metal cables (main unit with locator). Connect the end of one cable to the main unit. Thanks to the detector, you'll be able to locate this cable among a multitude of others, so you can easily intervene on it in the event of damage, for example. The detector lights up in front of it and emits a beep to locate the cord, so you can even use the headphones supplied to work in silence!
This tester features an anti-jamming function that enables it to work even very close to electronic sources (PC, hub, switch...).
Central control :
LCD screen Large 53x25mm backlit display,
Tracing signal frequency 225Hz,
Maximum tracing distance 3000m (electrified cable),
2000m (non-electrified cable),
Maximum mapping distance 2500m,
Maximum test distance 1000m,
Tone 2 Tones, adjustable,
Compatible with RJ11,RJ45,BNC,USB,
Mapping on LCD screen,
Shield indication on LCD screen,
Voltage protection AC 60V/DC 42V,
Low battery indication on LCD screen (6.5V),
With DC9.0V battery (NEDA 1604/6F22 DC9V) x 1pc ,
Dimensions (LxWxD) 185 x 80 x 32mm.
Locator :
Frequency 225kHz,
Consumption less than 70mA,
Headphone socket 1,
LED 2 LEDs,
Battery type DC9.0V?NEDA 1604/6F22 DC9V) x 1pc ,
Dimensions (LxWxD) 218 x 46 x 29mm.
Contents:
1x central control with large LCD display, 1x satellite, 1x induction sound locator, 1x headset, 1x RJ11 adapter / "crocodile" clips, 1x soft case. Please note that the tester interface is in ENGLISH.