M2 adapter (SATA B Key or B+M Key) to SATA With SATA 2.5" enclosure With SATA 2.5"" enclosure

M.2 (NGFF) to SATA 3.0 adapter with protective case in 2.5" format Use:
To mount an M.2 SSD card in SATA type B Key or B+M Key on a SATA 7+15-pin connector. SATA-type SSD card in B Key or B+M Key to a 7+15-pin SATA-type connector.
This adapter is integrated into a 2.5" drive-format case, allowing you to protect the SSD and mount the whole unit "cleanly" in your computer.
Compatibility:
For SATA-type M2 SSDs, will not support PCIe-type M2 SSDs. For B Key or B+M Key connector SATA 1/2/3 compatible
Specifications:
For M.2 drives in 3.3V
Maximum bandwidth 6GB in SATA 3 (SATA revision 3.1)
Supports M2 SSDs in the following formats:
Type 2242-D2-B-M: 42mm(L) x 22mm(W)
Type 2260-D2-B-M: 60mm(L) x 22mm(W)
Type 2280-D2-B-M: 80mm(L) x 22mm(W)
The SSD installed on this adapter will be recognized as a "classic" SATA drive, so you can install an operating system on it or use it for storage.
The protective case has the same fixing points as 2.5" format disks, so it can be simply and securely fitted in place of a 2.5" SATA disk.
Sold in a box, with fixing screws for the SSD and screwdriver.