EDSFF E1.S NVMe PCIe Gen4 SSD Adapter to 68-Pin U.2 SFF-8639 Interface, Compatible with 5.9 mm to 25 mm E1.S SSDs

This adapter allows you to install an EDSFF E1.S NVMe PCIe Gen4 SSD on a PCIe Gen3- or PCIe Gen4-compatible U.2 SFF-8639 interface. It provides full conversion between the E1.S and U.2 formats, enabling the host system to detect the E1.S SSD as a standard U.2 device.

Compatibility:

EDSFF E1.S NVMe PCIe Gen3 and PCIe Gen4 SSDs.

Short E1.S SSDs.

Compatible with E1.S SSDs of all thicknesses.

Works on U.2 SFF-8639 PCIe Gen3 and Gen4 interfaces.

Compatible with systems supporting the NVMe protocol.

Not compatible with U.3 interfaces.

Technical Specifications:

Passive EDSFF E1.S to U.2 SFF-8639 conversion adapter.

PCI Express Gen4-compatible architecture.

110 mm EDSFF E1.S connector with integrated mounting system.

Supports E1.S SSDs: 5.9mm/12W, 8mm/16W, 9.5mm/20W, 15mm/20W, 25mm/25W.

Short and long spacers included for adaptation to different SSD thicknesses.

Two mounting positions available.

68-pin U.2 SFF-8639 host connector.

Full support for the NVM Express (NVMe) protocol.

No external power supply or specific driver required.

SSD mounting hardware included.

Dimensions: 140 × 52 × 10 mm.