Riser PCIe x4 to M2 E A Key adapter with 20cm ribbon cable for mounting a PCI Express 4X card on an M.2 EA Key slot

Allows you to mount a 1x, 2x or 4x PCIe card on an E, A or E+A Key port.
Be sure to check beforehand whether your motherboard's E/A key port can accept any peripheral or not (some older motherboards will only accept a wifi or bluetooth card on this type of port).
Specifications:
This riser is for PCIe M Key M2 SSDs only (NVMe or AHCI).
The internal part will fit into the M2 E, A or E+A Key slot. It is in 2230 format and will therefore fit all formats (2230, 2242, 2260, 2280, 22110), and has the E+A Key.
The external part has a 4x type PCIe connector.
The two parts are connected by a 20cm shielded flexible ribbon.
For PCIe Gen 3.0: does not affect M2 port performance or type (PCIe Gen 1.0, 2.0, 3.0 etc...).
Power supply on PCIe plate via floppy connector (15-pin SATA/floppy adapter supplied).
Supplied with screwdriver and screws for attaching M2 E A Key part to dedicated slot.