Serial RS232 and Parallel PCI Controller Board - 4 COM RS-232 DB9 ports +1 LPT IEEE1284 DB25 port - SUNIX SUN1999 (MIO5099A) chipset

Features:
SUNIX manufacturing (Reference MIO5099A).
CHIPSET SUNIX SUN1999.
Universal PCI 64/32bit 3.3V/5V PCI Ver 3.0, 2.3, 2.2, 2.1. RS232: IRQ and IO assigned by system,
FIFO 128 byte Hardware,
Signals DCD, TxD, RxD, RTS, CTS, DTR, DSR, GND, RI,
Transfer rate 50bps ~ 115.2Kbps,
Data Bit 5,6,7,8,
Stop Bit 1, 1.5, 2,
Parity even, odd, none, mark, space,
Flow control None, Xon/Xoff, RTS/CTS,
Protections: ±2KV ESD (HBM),
1 DB44 Female connector (supplied with DB44 to 4x DB9 cable). PARALLEL: IEEE1284 1 port interface,
FIFO 16 byte (hardware),
SPP/ECP/EPP/BPP signals,
Maximum data rate 1.8Mbps,
DB25 connector (on cord to 2x13 connector on PCB). Drivers for : XP/Vista/7/8.x/10(X86/X64) - Server 2003/2008/2012/2016 (x64) - Embedded XP Embedded/POSReady 2009/POSReady/Embedded System 2009 - Linux 2.x / 3.x / 4.x - DOS - FreeBSD 5.3~5.5/6.0~6.4 - QNX 6.3.2/6.4.0.
Standards: CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B FCC Part 15 Class B, BSMI: CNS13438, RoHS.
Environment: 0 to 60°C (operating), 5 to 95% RH, -20 to 85°C (storage).
Board dimensions 116 x 69 mm. Rq : Does not support "Key Locker" on parallel interface / Legacy 278/378 ISA modes are only supported in DOS mode / ECP/EPP/SPP/BPP modes are only supported by Windows, under Linux only SPP mode will be supported.