2xSATA RAID to mSATA adapter SATA DATA 7-pin plugs SATA DATA 7-pin plugs

2xSATA to mSATA RAID adapter Use:
To mount TWO SATA hard drives in place of one mSATA SSD.
Compatibility:
Breakable card compatible with mSATA half (26.8mmx30mm) and full size (50.95x30mm) SSD slots.
Specifications:
High-performance ASM1092R chipset.
Hardware RAID type 0, 1 or JBOD: selection via switch on board.
SATA interface type SATA3 Rev 3.2 (also compatible with SATA 1 and 2) - Data rate 6GB/s.
Compatible with SATA revision 3.0, with standard 7-pin connector.
The adapter transfers data only, SATA drives will only be connected via the 7-pin data connector, and the 15-pin power connector of each hard drive connected will also need to be powered by a power cord from the computer.
The RAID array will be recognized as a "classic" SATA drive, so you can install an operating system on it or use it for storage.
REAL DATA BITS MEASURED IN RAID 0 (with 2 crucial M550 SSDs): Read 542MB/s, Write 422 MB/s.