mSATA and M2 (M.2 NGFF) to SATA 3.0 adapter with Professional Range CHASSIS

M2 SATA and mSATA to SATA card with CHASSIS Professional range:
The components in the Pro range offer above-average quality and performance, for demanding enthusiasts and professionals.
In addition to their quality of design and finish, these boards offer the special feature of having drivers pre-installed in their Bios chip, so they are automatically recognized and installed by your PC or MAC without the need for a driver CD or internet download (see description below, pre-installed drivers may vary according to model)!
Features:
Conversion mSATA or M2 SATA to SATA with metal chassis in 2.5" drive,
Compatible with mSATA full size and half size, and M2 SATA 2242/2260/2280,
Compatible with double-sided SSDs,
M2 type 2280-D5-B Bkey connector,
Fast mSATA full-size connector ,
22-pin (15+7) SATA connector,
Bootable card ,
2.5" with screw slots, 100.45mm x 69.85mm x 7mm,
Transparent for operating system, unnecessary drivers, all-OS compatible (Windows, Mac, Linux...),
Power supply for SSDs and adapter from SATA connector,
Maximum SSD power supply 3.3V/4A,
SSD M2 priority over SSD SATA.
Components RoHS

Features:
Convert mSATA or M.2 SATA SSD to standard 2.5? SATA drive Form Factor
Supports Full Size mSATA SSD or SATA based M.2 80mm, 60mm, 42mm, 30mm SSD
Latch type mSATA connector on board, no need the screw for the retention of mSATA SSD
M.2 NGFF type 2280-D5-B B Key connector on board
Movable M.2 NGFF stand-off and multiple plated-holes supports type 2280, 2260, 2242 and 2230 SSD
Supports dual-sided M.2 SSD module 1.5mm component height on the top and bottom side
100% Compatible with 2.5? SATA drive mechanical spec
22 pin SATA (Signals and Power) male connector on board
mSATA or M.2 SATA SSD can be the primary bootable device containing the OS and application.
Includes 2.5 ? drive metal frame with 8 mounting holes and 4 HDD screws. Dimension of PCBA with 2.5? frame : 100.45mm x 69.85mm x 7mm
Transparent to the operating system and no driver required. Supports any OS like Windows, Mac and Linux
SSD & PCBA power from 15Pin SATA 5V input. Provides Max 3.3V/4A power to SSD
M.2 SSD active, if both M.2 & mSATA SSD installed >