RJ45 RJ11 Network Tester. Continuity Test, Length, Poe. Flash function. with tracking probe.

It has three modes for options to track cable like digital mode, analog mode and PoE mode. That means it’s equipped with the most powerful cable location technologies for any work environment.
Also, it includes cable length measurement , cable faults testing, PoE testing, hub blink and NCV function, all these makes it a must-tool for cabling engineers.

Product Operation
1. CONT-- Test open, short, cross,ect for STP, UTP cable.
2. Length--measure length of lan cable, range is 2.5m~200m.
3. Scan--Analog/Digital/ PoE mode to locate lan cables.
4. PoE-- available for standard or non-standard PoE switch (5~60V), identify AT or AF standard of PSE type.  
5. Flash--locate network port by the flashing port light on switch/ router.
 
Specification

Wiremap
Cable type: CAT5、CAT6 (STP & UTP)
Test with switch directly: Yes
Max range: 600m

Length
Cable type: CAT5、CAT6 (STP & UTP)
Test range: 2~200m
Accuracy: 1. 6m
Breakage location: Yes

Scan part
Cable type: CAT5、CAT6 (STP & UTP)
Max. signal voltage: 8Vp-p
Frequency: 130KHz
AC filter: Yes
Max range: 600m

POE part
Test range: DC 5~60V standard / non-standard PoE switch
Voltage display: Yes
PSE type: IEEE 802. 3af/at

LCD display: 128*64 Dot-matrix with backlight
Power supply: AAA*3 Low battery warning: 2. 7V
Auto-off time: 15min、30min、60min、OFF
Voltage protection: DC48V 5mA