SUNIX PAR6408A PCI Express PCIe Parallel Control Board LPT IEEE1284 - SPP ECP EPP BPP - Chipset SUN2212 - High and Low Profile. Industrial range

Features :
Interface IEEE1284
Controller SUNIX SUN2212
PoweredIO Serial card. +5VDC and +12VDC power output over both COM 1st or 9th pins.
BUS PCI Express Spec 2.0, Single-Lane (x1)
1 port IEEE1284
FIFO 16byte Hardware
Mode SPP / ECP / EPP / BPP
Speed Maximum 1.8MBps
PCB Connector DB25 Female
Parity even, odd, none, mark, space

Driver Support : Windows Client XP / Vista / 7 / 8.x / 10 (X86/X64), Windows Server 2003 / 2008 / 2012 / 2016 (X64), Windows Embedded Windows XP Embedded / POSReady 2009 / POSReady / Embedded System 2009, Linux 2.x / 3.x / 4.x, DOS, FreeBSD 5.3~5.5 / 6.0~6.4, QNX 6.3.2/6.4.0.

Regulatory Approvals : CE EN55022 Class B, EN55024, EN61000-3-2, EN61000-3-3, VCCI Class B, FCC Part 15 Class B, BSMI: CNS13438, RoHS.

Environment :
Operation Temperature 0 to 60°C (32 to 140°F), Operation Humidity 5 to 95% RH, Storage Temperature -20 to 85°C (-4 to 185°F).
Dimension  65 x 69 mm

Note:  LPT port does not support LPT Key Locker Parallel device.  LPT port does not support legacy 278/378/3BC ISA address under Microsoft Windows nor Linux operation systems. ECP / EPP / SPP / BPP modes work under Windows, and Linux driver only supports SPP mode.