PCI Express 2ports 2.5G BASE-T Network PoE Card SUNIX LAN2225P

Chipset  Intel I225LM
Interface  PCI Express Gen2 x1
Port  RJ45 (2.5GbE) x 2
Standard  IEEE 802.3, IEEE 802.3u, IEEE 802.3x, IEEE 802.3ab/az/bz, IEEE 802.1Q VLAN Tagging, IEEE 802.1ad Double VLAN
Network Media  10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) / 100BASE-TX: UTP category 5, 5e cable (maximum 100m) / 1000Base-T: UTP category 5, 5e cable (maximum 100m) / 2500Base-T: UTP category 5e, 6 cable (maximum 100m)
Data Rates  10/100/1000/2500Mbps
Jumbo frames (up to 9 KB and without TSN)
Time Sensitive Networking (TSN) support
PXE support
Advanced Power Management (APM) Support–[formerly Wake on LAN.
Advanced Configuration and Power Interface (ACPI) specification v2.0c.
Support intel vPRO, ASPM L0s, IEEE 802.3AF/AT.
2K isolation input to output.
Teaming and 802.1Q VLAN support
LED Indicator  2500Mbps Link/Act, 1000Mbps Link/Act, 100Mbps Link/Act

PoE Specifications
Supports IEEE 802.3at Power Sourcing Equipment (PSE)
Max. output 30W
Operates from a 50 V supply
Provides PD real-time protection through the following mechanisms: overload, under-load, over-voltage, over-temperature, and short-circuit.
Auto mode – allows turning PDs on and off automatically.

Power input options (Priority: ​​1 > 2 > 3): External DC power input(Φ2.1/Φ5.5 ), Internal 2x3 GFC power connector, PCIe bus power , External power :12V~24V, 6 pin GPU power :12V, PCIe Bus: 12V

O.S Support
Windows 11, 10 (X86/X64)
Linux 5.8 and above

Operation temp. 0 °C ～ 60 °C (32-104°F)
Operation humidity: < 85% non-condensing
Regulatory Approvals  CE, FCC, VCCI, BSMI RoHS