PCIe 3.1 16x controller card for 5 M2 SSDs (M.2 NGFF B Key or B+M Key SATA) or SATA hard drives - CHIPSET JMB585

This card allows you to control five M.2 SATA SSDs in B Key or B+M Key. Adapters are supplied to replace the M2 ports with conventional 7-pin SATA ports.
For all M.2 SSDs, either "B+M Key" or "B Key", but exclusively SATA. "B+M Key" or "B Key" type SSDs, but only SATA type.
Specifications:
CHIPSET JMB585.
For PCIe 16x type 3.1 ports.
PCIe GEN3 x2 bus bandwidth.
Compatible with "PCIe link layer power saving mode".
5 ports for M.2 SATA B-key or SATA hard disk (adapters supplied).
Compliant with SATA Revision 3.2 specifications.
Compatible with AHCI, NCQ, SATA link power saving mode.
Compatible with SATA plug-in detection.
Compatible with drive power control. SATA Partial/Slumber power management.
Compatible with types 2230/2242/2260/2280.
The card is fully powered from the PCIe slot.
The 5 SSDs are supported by the PCIe slot, they will be seen as 5 disks.
The card is "breakable" in low-profile format, and supplied with a low-profile bracket to be fitted in this case in place of the original bracket. It will then only support 2230 or 2242 SSD disks, or SATA disks (using the adapters supplied).
Drivers for Windows 10 / 8 / 7 / Vista / XP / Server 2003 / 2000 and Linux.