Out of stock
Out of stock
Minimum purchase quantity
The minimum purchase quantity is not reached
PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset

zoom

see also : PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset

non-contractual photo

PCIe Gen 4.0 x4 Dual LAN Ethernet RJ45 Network Controller Card (10G, 5G, 2.5G, 1G) with 2 Ports and Intel E610-XT2 Chipset

PCIe 4.0 x4 Dual-Ethernet-RJ45 10G, 5G, 2,5G, 1G, 2 Anschlüsse, Intel E610-XT2

Ref. PCIe Gen 4 10G RJ45 x2 Intel E610 SWT
KALEA-INFORMATIQUE
3760306799363
New 162.42 Not including tax 194.90 Including tax

In stock

quantity

Back in stock notification
Receive an alert by email when your choice is in stock
Your e-mail*:

Send this page to a friend

Product Details

This PCI Express 4.0 x4 network card is based on the latest-generation Intel E610-XT2 controller.

These controllers are manufactured using 7nm technology, ensuring low-power operation (45% less power consumption than cards based on the Intel X710 chipset, and 60% less than cards based on the Intel X550 chipset!)

Compatibility:

For PCIe Gen 4.0 or higher x4, x8, or x16 ports; backward compatible with PCI Express 3.0, 2.0, and 1.0.

Compatible with Windows Server 2016, 2019, 2022, and 2025.

Compatible with Windows 11/10.

Compatible with Linux Kernel 6.x, Red Hat Enterprise Linux 8.x, 9.x, and 10, Ubuntu 22.04 and 24.04 LTS, Debian 10, 11, and 12, CentOS 7 and 8, SUSE Linux Enterprise Server, VMware ESXi 7.0 and 8.0. , FreeBSD 13.x and 14.x...

Technical Specifications:

Intel Ethernet E610-XT2 controller manufactured using 7 nm technology.

PCI Express Gen 4.0 x4 (compatible with x4, x8, and x16 ports).

Two 10 Gigabit Ethernet RJ45 ports.

Supported data rates: 10 Gb/s, 5 Gb/s, 2.5 Gb/s, 1 Gb/s, and 100 Mb/s.

Compatible with 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T, and 100BASE-TX Ethernet networks.

Communication distance over Cat5e, Cat6, and Cat6A cabling up to 100 meters.

Full-duplex operation at all supported speeds.

Compliant with the IEEE 802.3an 10GBASE-T standard.

Maximum power consumption of only 5.1 W in dual 10G port operation.

Supports Jumbo Frames up to 9.5 KB.

Supports Energy Efficient Ethernet (EEE) IEEE 802.3az.

Supports RSS (Receive Side Scaling).

Supports IPv4 and IPv6 protocols.

Hardware offload for UDP, TCP, and IP Checksum.

Supports TSO (TCP Segmentation Offload).

LRO (Large Receive Offload) support.

Hardware acceleration for VXLAN, GENEVE, and NVGRE.

iSCSI and NFS offload support.

Intel VT-c virtualization support.

SR-IOV support.

VMDq support.

Advanced integrated QoS management.

Hardware Flow Director.

Up to 64 virtual machines per port.

Data Center Bridging (DCB) and IEEE 802.1Qaz ETS support.

Intelligent interrupt rate control to optimize CPU utilization.

LED indicators for activity, speed, and network link.

Operating temperature: 0°C to 70°C.

Dimensions: 150 x 69 mm.

Low-profile mounting bracket included.