PCIe Gen 4.0 x8 Quad LAN Ethernet RJ45 10G, 5G, 2.5G, 1G 4-port network controller card with Intel E610-XT4 chipset manufactured using a 7nm process

This PCI Express 4.0 x4 network card is based on the latest-generation Intel E610-XT4 controller.

These controllers are manufactured using 7nm technology, ensuring low-power operation (45% less power consumption than cards based on the Intel X710 chipset, and 60% less than those based on the Intel X550 chipset!)

Compatibility:

For PCIe Gen 4.0 or higher x4, x8 or x16 slots; backwards compatible with PCI Express 3.0, 2.0 and 1.0.

Compatible with Windows Server 2016, 2019, 2022 and 2025.

Compatible with Windows 11/10.

Compatible with Linux Kernel 6.x, Red Hat Enterprise Linux 8.x, 9.x and 10, Ubuntu 22.04 and 24.04 LTS, Debian 10, 11 and 12, CentOS 7 and 8, SUSE Linux Enterprise Server, VMware ESXi 7.0 and 8.0. , FreeBSD 13.x and 14.x...

Technical specifications:

Intel Ethernet E610-XT4 controller manufactured using 7 nm technology.

PCI Express Gen 4.0 x8 (compatible with x8 and x16 ports).

Four 10 Gigabit Ethernet RJ45 ports.

Supported data rates: 10 Gb/s, 5 Gb/s, 2.5 Gb/s, 1 Gb/s and 100 Mb/s.

Compatible with 10GBASE-T, 5GBASE-T, 2.5GBASE-T, 1000BASE-T and 100BASE-TX Ethernet networks.

Communication distance over Cat5e, Cat6 and Cat6A cabling up to 100 metres.

Full-duplex operation at all supported speeds.

Compliant with the IEEE 802.3an 10GBASE-T standard.

Maximum power consumption of just 9.7 W in 10G quad-port operation.

Support for Jumbo Frames up to 9.5 KB.

Support for Energy Efficient Ethernet (EEE) IEEE 802.3az.

Support for RSS (Receive Side Scaling).

Support for IPv4 and IPv6 protocols.

Hardware offload for UDP, TCP and IP Checksum.

Support for TSO (TCP Segmentation Offload).

Support for LRO (Large Receive Offload).

Hardware acceleration for VXLAN, GENEVE and NVGRE.

Support for iSCSI and NFS offload.

Intel VT-c virtualisation support.

Support for SR-IOV.

Support for VMDq.

Advanced integrated QoS management.

Hardware-based Flow Director.

Up to 64 virtual machines per port.

Support for Data Centre Bridging (DCB) and IEEE 802.1Qaz ETS.

Intelligent interrupt rate control to optimise CPU utilisation.

LED indicators for activity, speed and network link status.

Operating temperature: 0°C to 70°C.

Dimensions: 150 x 69 mm.

Low-profile mounting bracket included.