PCIe 3.1 4X controller board with 24 6G SATA ports. JMB575 chipset (x6). with Low and High Profile cords and brackets

Features
Supports up to two lane of PCI Express.
Complies with PCI Express Base Specification Revision 3.1a.
Compliant with Serial ATA Port Multiplier Spec. Revision 1.2
Compliant with Serial ATA Port Selector Spec. Revision 1.0
Compliant with Serial ATA PHY Electrical Spec. Revision 1.0
Complies with SATA Specification Revision 3.2
Supports PCIe link layer power saving mode.
Supports 24-port 6Gb/s SATA III interface.
Supports Port Multiplier
Supports command-based and FIS-based for Port Multiplier.
Supports AHCI mode and IDE programming interface.
Supports Native Command Queue (NCQ).
Supports SATA link power saving mode (partial and slumber)
Supports SATA plug-in detection capable.
Supports drive power control and staggered spin-up.
Supports SATA Partial / Slumber power management state.  
Chipset : JMB575 (x6)

Note:Don’t support system boot disk

System Requirements
Windows OS
Linux-base OS

Package Contents
1 × PCIe Gen3x4 to 24 SATA 6Gb/s Card
1 × User Manual
3 × Slim SAS SFF-8654 8i 74P to 8*SATA Cable
1 x Low Profile Bracket