PCIe SSD M2 SATA and/or PCIe controller card - 2 M.2 Type B and M Key ports. SATA, AHCI and NVMe support.

This card will allow you to control two M.2 SSDs.
There are two slots, one for B Key SATA M.2 (NGFF) SSDs, the other for M Key PCIe M.2 (NGFF) SSDs.
You can mount both SSDs at the same time.
For any M.2 "M Key" or "B Key" SSD.
Specifications:
For 4x PCIe slot.
Compatible with types 2230/2242/2260/2280. "M Key" or "B Key" SSDs.
Specifications:
For 4x PCIe slot.
Compatible with types 2230/2242/2260/2280.
Driverless, works transparently with the operating system.
Top slot for M.2 SSDs SATA B Key: the SSD will be connected via the card's SATA connector to a SATA connector on the motherboard, and will be seen as a SATA 3 (6 GB) hard disk.
Bottom port for M.2 SSDs type PCIe M Key (AHCI and NVMe support): the SSD will be connected via the PCIe connector on the card to the motherboard, and will be seen as an additional hard disk.
Open-work board for improved SSD cooling.
Two brackets supplied: HIGH and LOW PROFILE. Screws included. Screwdriver included.