PCIe x4 to miniPCIe riser adapter with 15cm or 25cm shielded cable for mounting a 4x PCI express card on a Mini PCIe slot

Allows a PCIe x4 slot to be obtained from a Mini PCIe card slot for connection to a conventional PCIe card.
Compatibility:
Fits any notebook with a miniPCIe slot, plug and play, a purely "hardware" adapter requiring no software installation.
Use:
The miniPCIe part is housed in the notebook, connected by a shielded ribbon cable to the PCIe x4 socket that will house the PCIe card.

The PCIe socket is powered:
- in 3.3V via the miniPCIe port
- in 5V either via USB cable (hence the USB socket on the socket), or via floppy cable (floppy/sata adapter supplied).
- 12V via floppy cable (floppy/sata adapter supplied).
Depending on your PCIe card, you'll need to use the appropriate power supply.

For miniPCIe Mini Card Electromechanical Specification"" Revision 1.0 and PCI Express ""base Specification"" 1.1 (bandwidth 2.5Gpbs)
Supplied with two flexible and shielded mats of 15cm and 25cm.
The mPCIe card is breakable, allowing it to fit into both types of mPCIe slots, full or half size.
Compatible with all Windows, Mac, Linux etc... does not depend on the operating system used.