RJ45 PCIe Gen4 Multi-Gigabit Ethernet Network Controller Card (1G, 2.5G, 5G) with Marvell AQC114 Chipset

PCIe x1 Gen 4.0 network card, equipped with the Marvell AQC114 5G Multi-Gigabit Ethernet controller. It includes numerous hardware features designed to optimize performance, including RSS, LSO, checksum offload, Jumbo Frames, Wake-on-LAN, AVB, and PTP IEEE 1588 v2.

Compatibility:

PCI Express x1 host interface (compatible with x1, x4, x8, and x16).

Operating systems: Windows 10 (32-bit/64-bit), Windows 11 (32-bit/64-bit), and Linux Kernel 3.10 or higher.

Technical Specifications:

Marvell AQC114 network controller.

Integrated Ethernet MAC + PHY controller architecture.

PCI Express x1 Gen 4.0 interface, compatible with PCI Express Gen4, Gen3, and Gen2 (To fully benefit from 5 Gbps Ethernet throughput, a PCIe Gen4 x1 connection is recommended).

PCIe bus bandwidth up to 16 GT/s in Gen4, 8 GT/s in Gen3, and 5 GT/s in Gen2, per lane.

Network interface: 1 Multi-Gigabit Ethernet RJ45 port.

Supported Ethernet data rates: 5 Gbps / 2.5 Gbps / 1 Gbps / 100 Mbps / 10 Mbps.

Transmission distance up to 100 meters at the advertised speeds.

Network technologies: 5GBASE-T / 2.5GBASE-T / 1000BASE-T / 100BASE-TX / 10BASE-Te.

Recommended cabling: Cat5e or higher.

Marvell Alaska PHY with NBASE-T technology.

Energy Efficient Ethernet (EEE) supported.

Jumbo frames up to 16 KB.

Supported features: Wake-on-LAN, AVB (Audio Video Bridging), ARP protocol, TCP Keepalive, advanced cable diagnostics.

PTP / IEEE 1588 v2 time synchronization.

LSO, RSS, DCA, and Header Checksum optimizations.

IPv4/IPv6, IPv6/TCP, and IPv6/UDP checksum offload.

PCIe Message-Signaled Interrupts and Legacy INTx interrupts.

LED indicators for link status and network activity.

Standard bracket design with a low-profile bracket also included.