USB to RS422 RS485 CHIPSET FTDI FT232 - 1.8M CORD - MAGNETIC PROTECTION -

RS-485 and RS-422 to USB converter Complete, 1.8m braided cord with magnetic protection
WITH FDTI FT232 CHIPSET
Use:
This adapter connects an RS485-422 system to a USB port.
Specifications:
CHIPSET FTDI TYPE FT232 - FDTI chipsets are very popular for their stability in USB UART processes.
Standard USB2.0, also compatible with USB V1.0, 1.1 (and 3.0 with USB 2.0 speed).
Standard RS-485,RS-422 TIA/EIA.
USB signals: VCC, DATA+, DATA-, GND and FG.
RS-422 signals: T/R+,T/R-,RXT+,RXD-,GND.
RS-485 signals: T/R+,T/R-.GND.
Asynchronous / point-to-point / point-to-multipoint operation 2-wire (half duplex) 4-wire (full duplex).
Single USB chip managing transfer.
Automatic flow control.
Compatible transfer from 300 baud to 921600 baud.
UART interface compatible with 7/8 data bits,1/2 stop bits and even/odd/mark/space/none.
Control none,hardware and xon/xoff.
Options bit bang RD# WR# strobes .
Rs-485/422 distance 1.2km (300bps-921600bps) and USB 5m (ideally, stay on the supplied 1.8m cord).
±15KV ESD and overvoltage protection.
Power (PWR), Send (TXD) and Receive (RXD) diodes (power/data sending/data receiving).
Transmission via crossover or shielded cable.
Supports ambient temperatures from -40 to 85?C.
Windows XP,Vista,7,8, 10 32,64-bit / Windows Server 2K3,2K8,2K12 32,64-bit / Windows XP Embedded / Windows CE 4.2, 5.0 and 6.0 / Mac OS-X / Linux 3.2 and higher / Android.