USB to RS422 RS485 CHIPSET FTDI FT232 CONVERTER - Allows Mounting of RS-485 or RS-422 Series Hardware (Wire or DB9 Plug) on Single USB Port

Feature:
- Using chip FTDI industry
- Compatible with USB1.1, 2.0, the maximum rate can be up to 12 MBPS
- Without setting location and IRQ, I/O and friendly user interface
- Supports remote sensei and power management
- A serial port transmission speed can reach 921.6 KBPS
- Supports hot plug and PnP
- Supports Windows 98/ME/2000/XP/7/8/10/CE/Vista, MAC and Linux 2.4.20

Specification:

RS422/RS485 TIA/EIA Standard
USB2.0; compatible USB 1.1
Baud rate: 300bps to 921Kbps
Indication LED's for Power, TX and RX
No IRQs, DMA or required; No IRQ Conflicts
Automatic send data control. Auto detection of data speed; Zero delay automatic transmission
Automatic hand-shaking protocol supported
Built-in static and 600W surge protection; 15KV ESD protection (Electro-Static discharge)
Supports multiple terminals up to 32 RS-485 or RS-422 devices
Transmission distance: max 1200 meters for RS-485/422 end
Working modes: asynchronous; point-to-point or point-to-multipoint; 2-line half duplex and 4-line full duplex.