UTS1009GC 1 port USB-to-RS-232 Adapter

Expands one independent RS-232 serial ports through USB interface.
Supports Universal Serial Bus Plug-n-Play and Hot-Swapping feature.
No IRQ, DMA, I/O address resource required.
Supports USB 1.1 full speed 12Mbps and USB 2.0/3.0/3.1 compatible.
Each serial port provides transmission rate up to 115.2Kbps.
Built-in ± 15KV ESD protection for all serial signals.
Compact Size and low power consumption.
Supports both USB bus power mode without additional external power.
Certified by CE, FCC, RoHS, and Microsoft WHQL approval.
Support Microsoft Windows, Mac and Linux.

Specifications

Interface : 1 port RS-232 DB9
Controller : Prolific PL2303GC
BUS : Universal Serial Bus (USB)
IRQ & IO : Assigned by System
FIFO : Receive 768 byte Buffer Hardware
Transmit 256 byte Buffer Hardware
Signal : TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Baud rate : 50~115.2Kbps
Data bit : 5, 6, 7, 8
Stop bit : 1, 1.5, 2
Parity : even, odd, none, mark, space
Protection : ±15KV ESD protection for each signal, Human Body Model (HBM), ±15KV IEC1000-4-2 Air Gap Discharge, ±8KV ESD IEC61000-4-2 Contact Discharge

Power Source : USB Bus Power +5VDC (±5%)
Standby Power Consumption : <100mA / 5VDC
Working Power Consumption : <150mA / 5VDC

Driver Support
Windows Client : 7 / 8.x / 10 (X86/X64) / 11
Windows Server : 2008/ 2008R2 / 2012/ 2012R2/ 2016/ 2019
Linux : Linux 2.4.3.1 and above
MAC : MAC OS 10.9/11

Standards and Certifications
EMC : CE, FCC, VCCI, BSMI
Green : RoHS, WEEE,REACH

Environment
Operation Temperature : 0 to 60°C (32 to 140°F)
Operation Humidity : 5 to 95% RH
Storage Temperature : -20 to 85°C (-4 to 185°F)
Dimension
PCB Dimension : 15 x 45 x 33 mm
Cable Length : 1200 mm