RS232 RS422 RS485 converter Photoelectric insulation Photoelectric insulation

RS232 to RS422/485 converter WITH PHOTOELECTRICAL ISOLATION
To convert an RS232 signal into an RS422 or RS485 signal.
Plug and play adapter, no parameter setting required.
Specifications:
Compatible with RS-232, RS-485 and RS-422. Conforms to EIA/TIA standards.
Electrical interface: DB9 female connector for RS232 input and 10-pin connector for RS422/485 output.
Overload protection up to 600W, ESD protection +/-15KV. Insulation rating: 2500Vrms 500DC non-stop.
Supported modes: asynchronous Full Duplex and asynchronous Half Duplex.
3 activity diodes: Power (PWR), Send (TXD), Receive (RXD).
Transmission via twisted pair or shielded cables.
Point-to-point or point-to-multipoint bridging.
Transfer rate 15.2 KBps (up to 300m), 3.8KBps (up to 2.4km), 9600Bps (up to 5Km).
Signals:
RS232 input: GND / RXD / TXD / DTR / GND / DSR / RTS / CTS / RI. RS422 output: SEND A+ / SEND B- / RECEIVE A+ / RECEIVE B- / Power 10V-48VDC RS485 output: RS485 A+ / RS-485 B- / Power 10V-48VDC
Dimensions 113mm x 55mm x 25mm, supplied with base for fixing.