Extender DVI 50M - Extender One DVI connection via RJ45 - Metal BOXES, with POWER SUPPLIES - Max. resolution 2048 x 1536

The extender consists of two parts, a transmitter and a receiver, which are connected by a serial RJ45 cable. This enables much greater distances to be covered than would be possible with a DVI cable, and at much lower cost. Last but not least, RJ45 cords are much less rigid than DVI cables, making them easier to conceal and fit into smaller sheaths.
You'll need to use good-quality RJ45 cords, i.e. at least CAT 5e category, and preferably category 6 (where shielding per pair will ensure that losses are virtually non-existent).
Installation:
Link the transmitter to your video source via a DVI cord, and the receiver to your display device, again via an HDMI cord. Then connect the transmitter and receiver via an RJ45 cable, and power both: your device is ready! Note that this extender is sold without cables, neither DVI nor RJ45. You'll find the transmitter, receiver and two power supplies in the package.
Specifications:
Maximum supported length: 50M.
Maximum image resolution 2048x1536.
Power consumption 3W.
Video bandwidth 1.65Gbps (165MHz).