Cable Converter USB to RS-485 (RS485 DB9) - Length 1.2 M - with Additional Plate for Direct Wire Mounting

Using chip FTDI industry. Compatible with USB1.1, 2.0, the maximum rate can be up to 12 MBPS. A serial port transmission speed can reach 921.6 KBPS
Without setting location and IRQ, I/O and friendly user interface
Supports remote sensei and power management
Supports hot plug and PnP. Compatible Windows 98/ME/2000/XP/7/8/10/CE/Vista, MAC and Linux
Interface electrostatic protection, signal surge protection

Feature:
- Using chip FTDI industry
- Compatible with USB1.1, 2.0, the maximum rate can be up to 12 MBPS
- Without setting location and IRQ, I/O and friendly user interface
- Supports remote sensei and power management
- A serial port transmission speed can reach 921.6 KBPS
- Supports hot plug and PnP
- Supports Windows 98/ME/2000/XP/7/8/10/CE/Vista, MAC and Linux 2.4.20

Specification:
(1).USB:
- Interface characteristic: Compatible USB1.0/1.1, 2.0, plug and play
- Interface form: The USB type A mouth
- Velocity: 12 Mbps (USB) at full speed
- I/O address: BIOS appoint
- IRQ: BIOS appoint
- FIFO: 64 bytes
(2). Serial interface:
- Interface form: DB9 needle
- Baud rate: 50 bps to 460.8Kbps
- Data bits: 5,6,7,8
- Parity bit: None, Even, Odd, Space, Mark
- Flow control: "XON"/"XOFF"
(3).Serial signal:
- RS-485: "485+", "485-"
(4).Protection interface:
- ESD protect: 15 kv esd protection, 1000w surge protection
(5).Driver support:
- Supported operating systems: Windows (2000, XP x86/x64, 2003 x86/x64,Vista x86/x64), WinCE 6.0, Linux 2.6 x86/x64
(6). Cable length 1 meter
(7). Package: 1pc cable, 1pc CD